Stephenson and Rocket
Railways: How the Iron Road Changed the World
Course 41 · Chapter 3 · Stephenson and Rocket
Railways: How the Iron Road Changed the World 2 ended with working locomotives that were still confined to collieries and ironworks. This chapter follows the step from industrial curiosity to public railway: the Stockton and Darlington line, the contest at Rainhill that produced the Rocket, and the Liverpool and Manchester Railway, which put the pieces together. As before, dates, figures and "firsts" are flagged "check".
George Stephenson and the Colliery Engines
George Stephenson (born 1781 near Newcastle) had no formal schooling. He worked his way up through the Tyneside collieries as an engine-man and engine-wright, and built his first locomotive, "Blucher", for the Killingworth colliery around 1814 (check). His son Robert, better educated, later became a partner in the family firm and an engineer in his own right. Between them they made the improvements that mattered most: sturdier wheels and flanges, better springing, and a determination to treat the track and the locomotive as one system, since a heavy engine broke weak rails (the lesson of Trevithick in Chapter 2).
Stockton and Darlington, 1825
The Stockton and Darlington Railway in north-east England was built to carry coal from the Durham coalfield to the River Tees at Stockton. Its Act of Parliament (1821, check) assumed horses, but Stephenson persuaded the promoters to allow steam locomotives on part of the line. It opened on 27 September 1825 (check), with "Locomotion No. 1" hauling a train of wagons loaded with coal and flour and carrying passengers in a few vehicles, before a large crowd (check the speed, the load and the number of people).
It is often called the first public steam railway, and that is fair if "public" means the line was open to any customer who paid the tolls. But it was not what we would now call a modern railway. Much of the traffic was still hauled by horses, stationary engines pulled wagons up inclines on ropes, and for some years independent carriers ran their own wagons over the track for a fee, a bit like lorries on a toll road (check the details). The company only gradually took control of running its own trains.
The Rainhill Trials, 1829
The Liverpool and Manchester Railway (L&MR), authorised in 1826 after an earlier failed attempt (check), had to decide how to move trains. Some directors favoured stationary engines hauling trains along the line by rope; others favoured locomotives. In 1829 the company held a competition at Rainhill, near Liverpool, with a prize of £500 (some sources say £550, check) for the locomotive that met a set of rules. The trials ran from 6 to 14 October 1829.
The rules, in outline (check the exact figures): the engine had to be light enough for its weight to be carried safely, to burn its own smoke, to haul a stated multiple of its own weight at a minimum speed, and to complete repeated runs along a measured stretch of track. Of ten entries, five were able to compete.
| Entrant (check each) | Notes |
|---|---|
| Rocket (Robert Stephenson and Company) | Multi-tube boiler, steam blast, cylinders at a steep angle; completed the trials and won |
| Novelty (Braithwaite and Ericsson) | Light and fast, a crowd favourite, but suffered breakdowns and withdrew |
| Sans Pareil (Timothy Hackworth) | Sound design but heavier than the rules allowed; broke down |
| Perseverance (Timothy Burstall) | Struggled on the day and withdrew |
| Cycloped (Thomas Shaw Brandreth) | Powered by a horse on a treadmill; not a true steam engine and ruled out |
What Made Rocket Good
Rocket was not the first locomotive or even the most novel at Rainhill. Its strength was a combination of features that worked together:
- A multi-tube boiler. Instead of one or two large flues, the hot gases passed through a bundle of narrow copper tubes surrounded by water. That gave far more heating surface for the same size of boiler, so more steam, faster (the tubes are often credited to Henry Booth, treasurer of the L&MR, with the Stephensons, check).
- The steam blast. Exhaust steam up the chimney drew the fire, as Trevithick's engine had done in Chapter 2.
- A separate firebox. A water-jacketed firebox attached to the boiler improved heating further.
- Direct drive. The cylinders drove the front wheels without gearing or ropes. They were set at a steep angle at first, and later engines lowered them to a nearly horizontal position for a steadier ride.
Liverpool and Manchester, 1830
The L&MR opened on 15 September 1830 (check), with George Stephenson as engineer. It linked the port of Liverpool with the cotton mills of Manchester, about 30 miles, and it ran double track with locomotives, passengers and freight under one company and one timetable (check the track and traffic arrangements in more detail). Stations, ticketing, signals by hand, regular services and paid staff: much of what we now think of as running a railway had to be invented in this period.
The opening day was marked by tragedy. William Huskisson, a former cabinet minister and a local MP, was struck by a train while crossing the track and died that evening (check the details). The accident was reported across the country and made the new railway famous, though, as is often the case, the reporting also stressed the danger.
| Line (check each) | Opened | Traction | Traffic | Why it matters |
|---|---|---|---|---|
| Stockton and Darlington | 1825 | Locomotives, horses, rope inclines | Mainly coal; some passengers | First public steam railway, not yet a modern one |
| Liverpool and Manchester | 1830 | Locomotives (and rope haulage on one steep incline) | Passengers and freight between two cities | Template for the main-line railway: timetable, one company, steam traction |
Public Reaction
Reactions were mixed. Many were thrilled by the speed. Others feared that locomotives would terrify livestock, set fire to crops or poison the countryside with smoke, and some landowners and canal and coaching interests fought the proposed lines (check which landowners and interests objected to the L&MR). Surveying the Chat Moss bog and the cuttings and viaducts of the route also drew heavy public comment, as an engineering challenge that many believed impossible (check). When passengers actually rode the trains, the numbers exceeded what the company had predicted, and attitudes shifted quickly towards a national enthusiasm that Chapter 4 will meet as a financial bubble.
Exercises
Explain in what sense the Stockton and Darlington Railway was "the first public steam railway", and in what ways it was still unlike the modern idea of a railway.
List the features that made Rocket successful and explain, for each, which problem from Chapter 2 or earlier it addressed. Then say why a fast but unreliable entrant lost at Rainhill.
Compare the Stockton and Darlington and the Liverpool and Manchester railways using the table in this chapter, and decide which better deserves to be called the first modern railway. Give two reasons and one counter-argument.
Quick Reference
- Stockton and Darlington (1825): first public steam-hauled line, mixed horse, rope and locomotive working
- Rainhill Trials (6-14 October 1829): five of ten entries competed; Rocket won
- Rocket: multi-tube boiler, steam blast, direct drive, reliability
- Liverpool and Manchester (1830): double track, timetable, passengers and freight, one company
- Standard gauge: 4 ft 8½ in, carried over from Stephenson's earlier lines