Gauge Wars

Railways: How the Iron Road Changed the World

Course 41 · Chapter 5 · Gauge Wars

Railways: How the Iron Road Changed the World 4 showed how the 1840s boom built a national network company by company. This chapter looks at a problem hidden in that method: if every company chooses its own specification, the pieces may not fit together. As before, dates, figures and "firsts" are flagged "check".

What Gauge Means

The gauge of a railway is the distance between the inner faces of the two running rails. It decides what vehicles can use the track: a wagon built for one gauge simply cannot run on another. The gauge used by the Stephenson lines, 4 ft 8½ in (about 1,435 mm), came from the wagonways of the north-east of England, where the early locomotives were developed (see Railways: How the Iron Road Changed the World 1 and Railways: How the Iron Road Changed the World 3). It became the "standard" mainly because so many early lines used it, not because anyone proved it was best (check the origin of the exact figure).

Brunel Chooses Differently

Isambard Kingdom Brunel, engineer of the Great Western Railway from London towards Bristol, set a much wider gauge of 7 ft ¼ in, first set in 1835 (check the exact figure; some sources simply say 7 ft). His reasoning was technical: a wider gauge allowed a lower, more stable carriage body hung between the wheels, higher speeds, a smoother ride and room for larger boilers and wheels. The broad gauge Great Western was indeed fast and comfortable, and its engineers could argue that they had built the better railway (check the claims about speed, which are debated).

The weakness was not the design but the isolation. Brunel's lines were a separate system, and as other companies grew, the two gauges began to meet.

Feature (check each)Broad gaugeStandard gauge
Track width7 ft ¼ in (about 2,140 mm)4 ft 8½ in (about 1,435 mm)
Chief championBrunel and the Great WesternStephenson and most other companies
StrengthsStability, smooth running, room for large locomotivesCheaper to build, tighter curves, already widespread
WeaknessCostly, and cut off from most of the networkLess room for growth in vehicle size

Break of Gauge at Gloucester

The clash became obvious at Gloucester, where a broad gauge line from Bristol met a standard gauge line from Birmingham in 1844 (check the date). Nothing could run through. Passengers had to change trains, and goods had to be lifted by hand from one set of wagons to the other, a delay known as a break of gauge. Contemporary engravings show the confusion at the station, with crowds, porters and mountains of luggage and freight being moved between trains. Merchants and travellers complained loudly, and the transfer of goods added cost, delay and breakage (check some contemporary accounts).

The idea in one line A break of gauge turns a continuous journey into two journeys with a manual hand-off in the middle, and every hand-off costs time, money and goods.

The Gauge Commission and the 1846 Act

Parliament set up a Gauge Commission in 1845 to examine the question, taking evidence from engineers including Brunel himself (check the date of his evidence; one source gives 25 October 1845). Experimental trials were run comparing broad and standard gauge engines, and the commissioners reported in favour of the standard gauge, partly because of how much of it already existed and partly because of the cost of converting it (check the commissioners' reasoning). Their view was that broad gauge had a performance advantage, but that the case for compatibility outweighed it.

The Railway Regulation (Gauge) Act 1846 followed, making standard gauge the rule for new passenger railways in Great Britain, with exceptions for the south-west of England and some Welsh lines (check the exact scope). It did not force the Great Western to convert its existing broad gauge lines. Instead broad gauge slowly shrank, and the Great Western finally converted the last of its network in 1892 (check the date). In effect Parliament chose compatibility over the technically arguable winner.

Date (check each)Event
1835Brunel sets the Great Western to a gauge of about 7 ft
1844Broad and standard gauge lines meet at Gloucester
1845Gauge Commission takes evidence and runs comparative trials
1846Railway Regulation (Gauge) Act requires standard gauge for new lines, with exceptions
1892Great Western finishes converting its remaining broad gauge track

The Cost of Getting Standards Wrong

The lesson is not that broad gauge was foolish. It is that a standard has value from the number of systems that share it. A network whose parts interconnect is worth more than the sum of its parts, and an incompatible fragment loses much of that value, however good it is internally. The price of divergence was paid twice: first in transfers while the two gauges coexisted, then in the expensive conversion of the broad gauge lines. The same pattern repeated around the world, where countries chose different gauges for reasons of cost, terrain or politics, and some still face the consequences at borders today (check some examples, such as the break of gauge between Spain and France, or between Russia and its western neighbours).

The question of how to coordinate many independent companies on a single specification comes back in Railways: How the Iron Road Changed the World 6, when the railways force a common time.

Did you know When the Great Western converted from broad to standard gauge in 1892, the work was organised as a huge operation carried out over a single weekend on the main line, with thousands of workers moving one rail across along the whole route (check the details and the numbers involved).
Modern parallel Gauge is an interface standard, like a network protocol or a connector. A technically better but incompatible format, such as a proprietary protocol or a unique plug, can lose to a good-enough common one, and the cost of translation layers, adapters and conversions is the modern break of gauge. Any support engineer who has needed a dongle, a gateway or a format converter has met this problem.
Watch out The story is often told as "the worse gauge won". That oversimplifies it. Broad gauge had real advantages, but a very large part of the network already used standard gauge, and compatibility was worth more to the country than the performance edge on one company's lines. Also, the Act did not abolish broad gauge overnight.
Verified / Not Yet Verified Verified by a web search for this chapter: the Railway Regulation (Gauge) Act 1846 is dated to 18 August 1846; it made standard gauge the requirement for new lines with exceptions for the south-west and some Welsh lines; the broad gauge was about 7 ft ¼ in, first set in 1835; the standard gauge is 4 ft 8½ in; and the Bristol and Gloucester and Birmingham and Gloucester lines met at Gloucester in 1844. One source dates the Act to 1847, which appears to be an error. Not verified: the commissioners' detailed reasoning, the trial results, the origin of the standard figure, the details of the 1892 conversion and the foreign examples. Those come from general knowledge, so treat every "(check)" accordingly.

Exercises

Exercise 1

Define the gauge of a railway, and explain why Brunel preferred a wider gauge and why it still caused a problem.

Exercise 2

Describe what happened at Gloucester and why a break of gauge is costly for passengers and for freight.

Exercise 3

Explain why Parliament chose standard gauge in 1846 even though broad gauge had technical advantages, then give a modern example where an incompatible but better technology lost to a common standard.

Coming up Chapter 6 turns to Railway Time: local clock times against a national timetable, the telegraph, Bradshaw's guide, and the adoption of standard time.

Quick Reference

  • Standard gauge: 4 ft 8½ in, the Stephenson gauge, used by most lines
  • Broad gauge: about 7 ft ¼ in, Brunel's Great Western
  • Break of gauge: where two gauges meet and everything must be transferred (Gloucester, 1844)
  • Gauge Commission and Act: 1845 and 1846; standard gauge for new lines, with exceptions
  • End of broad gauge: Great Western conversion completed in 1892