prize41-2, Exercise 2: Following the energy Model answer (check the details): 1. Coal is shovelled from the tender into the firebox and burned on the grate, producing hot gas. 2. The hot gas passes through tubes in the boiler, heating the water around them into steam under pressure. 3. The driver opens the regulator, and steam flows to the cylinders. 4. Valve gear directs steam to the correct side of each piston, which pushes it back and forth. 5. Connecting rods turn that to-and-fro motion into rotation of the driving wheels. 6. The used steam goes out through the blastpipe and up the chimney, drawing air through the fire so it burns harder. Most of the energy is lost early: much of the heat leaves up the chimney as hot gas, more is lost through the boiler and cylinder walls, and the exhaust steam still carries heat away. Only a few percent reaches the wheels as useful work (the figure varies by engine, so check a source before quoting one).